Wireless wall relay with voltage dry contact to activate electrical loads using your homegrown energy
Smart Relay RC
How it works
Smart Relay RC is a wireless wall socket designed to make the most of energy produced on site by a PV system, and is compatible with Elios4you Smart systems (single-phase and three-phase).
The Smart Relay RC can be programmed by the “Elios4you” free App to switch an electrical load on and off according to the power generating capacity of the PV system and to the amount of power effectively available for self-consumption.
- Activation of electrical loads by “Elios4you” App
- Max rated power 13A @ 230Vac
- Instant usage measurement (displayed on App)
- Wireless communication to ZigBee standards
How to set automatic activation/deactivation threshold of electrical loads
Using the “Elios4you” App, you can configure customized parameters to automatically activate and deactivate an electrical load depending on specific circumstances, thus maximizing the operation in total self-consumption.
|Power supply||90-240 Vca; 1W; 50/60Hz|
|Output||2 outputs controlled in parallel (N.O.), max 13A 230Vac|
IEEE 802.15.4. ZigBee Home Automation protocol 1.2, power 3 dBm
Repeater function; radio range 15 m indoors / 30 m outdoors.
|Antenna||Internal, gain 0 dB|
|Ambient parameters||Operating conditions: 0 to +50°C; <80% R.H. n.c.
Storage conditions: -20 to +70°C; <80% R.H. n.c.
|Degree of protection||IP30|
|Conformity||2014/30/UE (EMC), 2014/35/UE (LVD) e 2014/53/UE (RED)|
|Dimensions (L x H x D)||76 x 116 x 25 mm|
You may also like…
Smart monitoring and self-consumption device for single-phase PV systems up to 12 kW with smart wireless accessories
Wireless pass-through socket to activate electrical loads thanks to homegrown energy
Wireless wall socket to activate electrical loads thanks to homegrown energy
Smart monitoring and self-consumption device for three-phase PV systems up to 100kW with smart wireless accessories