ZigBee Repeater
ZR-REP-EM

Key features

Repeating ZigBee messages between devices with poor link or out of coverage
Routing function
RF power 1mW
External antenna
12-24 Vdc/Vac power supply

ZR-REP-EM has the function to extend the radio range of devices making possible to cross obstacles or long distances; it can also act as a parent device for battery-powered sensors of the same family. It doesn't need any other connections but the supply one.

Technical Specs
General characteristics	Chip Ember EM2420 Compatible IEEE 802.15.4 Stack EmberZnet 3.5.x (ZigBee PRO) Modbus/RTU
RF characteristics	Frequency: 2405 MHz ÷ 2480 MHz Modulation: DSSS Nominal transmission power: 1mW (0 dBm) Reception sensitivity: -92 dBm Extern antenna Gain: 5,5 dB Coverage outdoor/indoor: 100m/30m
Supply	12-24 Vcc/Vca (±10%); 100mA; 50/60Hz
Connections	Supply: pull out terminals (3,81 mm pitch)
Environment parameters	Operating temperature: -10 ÷ +60°C; <80% U.R. not condensing Storage temperature: -20 ÷ +70°C; <80% U.R. not condensing Degree of protection: IP 55
Compliant with 2006/95/EEC, 89/336/EEC, 99/5/EEC directives Reference Norms	ETSI EN 300 328: Radio Compatibility for digitals wide band transmissions ETSI EN 301 489: Radio Compatibility EN 61000-6-2: Electromagnetic Compatibility - Emissions EN 61000-6-3: Electromagnetic Compatibility - Immunity EN 60950-1: Electric Safety